Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

As our End User Computing (EUC) Engineer you’ll be responsible for the ongoing management and operational support of our EUC environment. Here you’ll ensure users have the necessary hardware, software, and support required to perform their roles. You’ll also be involved in maintaining the computing environment, managing endpoint devices and security, administering virtual desktop infrastructure (VDI), while providing remote support as needed.

Within this position, your scope will cover:

• Managing and maintaining client computing environments, including physical hardware and virtual desktops to optimise performance and uptime
• Providing technical support to end users, troubleshooting hardware, software, and network-related issues via remote and in-person assistance
• Responsible for delivering endpoint management, ensuring devices are properly configured, secure, and compliant with our policies
• Administer virtual desktop infrastructure (VDI) solutions
• Collaborate with IT support teams to diagnose and resolve complex technical issues affecting end users
• Manage device imaging, software deployment, patching, and updates to maintain security and performance standards
• Ensure proper documentation of hardware inventories, configurations, and support tickets to track assets and service history\\

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain and develop the reliability test procedure.
• Managing the reliability test capability, improvement /automation. 
• Characterize various test profiles to meet customer specific requirements.
• Hands-on experience (tester setup) with automated test equipment (tester) and environmental chambers focusing on Temperature Cycling Test (TCT), Temperature Humidity, Highly Accelerated Stress Test (HAST) or other relevant equipment.
• Develop reliability test capability /test programs/ testing methods for new products or technologies.
• Involve in tester development & improvement. 
• Hands-on experience with electronic testing, debugging, and measurement tools (e.g., oscilloscopes, multimeters, thermal chambers, power supplies) or any other relevant tools/ equipment.
• Build and maintain dashboards and visualizations to support data‑driven decision making within the Reliability Engineering team.
• Support equipment and lab readiness initiatives through data tracking, automation, and system enablement.

Operational Core Responsibilities

1. Oversee and ensure effective execution of rooftop solar maintenance activities (planned and unplanned) in line with contractual scope of work, service level agreements (SLA), and compliance to SOPs.

2. Coordinate annual and monthly maintenance planning, aligning manpower, site access, and third-party support schedules.

3. Provide on-site technical leadership in fault diagnosis and troubleshooting. Guide resolution based on root cause rather than symptoms.

4. Coordinate with Customer Service and internal teams to ensure accurate and timely communication of maintenance outcomes for effective client reporting and service continuity.

5. Review and verify site reports, inspection checklists, photos, and test records submitted by Technicians and Engineers. Ensure proper documentation for internal reference and client reporting.

6. Prepare high-level technical reports for various needs including client requests, compliance, analysis, claims, etc.

7. Oversee inventory planning and availability of spare parts, tools, and equipment required for ongoing operations; ensure stock readiness to minimize service disruptions and support operational continuity.

8. Ensure proper tracking, escalation, and closure of service tickets within defined SLA timelines, including continuous review of open items and coordination with relevant parties to resolve delays.

9. Plan, lead, and supervise execution of special technical projects (e.g., solar PV dismantling and reinstallation, equipment upgrades, relocations) in coordination with clients, contractors, and internal teams, ensuring scope clarity, schedule adherence, and risk control.

10. Ensure compliance with Quality, Safety, Health, and Environmental (QSHE) standards in accordance with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and regulatory best practices.

Department Support Roles

1. Mentor and coach Engineer and Technician to improve technical competencies, task ownership, and work quality. Lead by example in field behaviour and problem-solving approach.

2. Assist in onboarding new field staff, delivering training on safety, standard tasks, and use of checklists or mobile apps. Support cross-division technical sharing if required.

3. Identify recurring issues or workflow inefficiencies. Recommend updates to checklists, SOPs, or job plans based on field feedback and lessons learned.

4. Provide technical input and documentation support for equipment failure investigations, including photo records, test results, and historical data.

5. Participate in high-priority maintenance or rectification works across other divisions/regions upon assignment by HOD.

6. Maintain professional relationships with clients, address operational concerns, and follow up on technical issues with support from the Customer Service and Commercial teams.

7. Act as the regional technical focal point for assigned accounts, building trust through consistent performance and communication.

8. Support technical risk reviews and provide site inputs during pre-project assessments or inter-departmental coordination meetings.

• Bachelor’s degree in Electrical Engineering or equivalent from a recognized institution.
• Possess 3 years of experience in project management, construction, or operations & maintenance of rooftop solar PV system.
• Possess valid CIDB Green Card and Working at Height certification.
• Advance understanding of rooftop solar PV systems, including design, components, troubleshooting, and compliance with performance and safety standards.
• Good understanding in Job Method Statement, HIRARC preparation for high risk working environment.
• Ability to prepare preventive and corrective maintenance schedules, oversee field service teams, and ensure timely, quality execution aligned with SLAs.
• Clear written and verbal communication skills to coordinate with internal stakeholders and document maintenance results through accurate technical reports.
• Strong interpersonal and communication skills for mentoring, client engagement, and inter-departmental collaboration.
• Proven capability to lead and guide technicians and assistant engineers in daily operations, training, and field discipline.
• Demonstrates high accountability, professionalism, and readiness to take initiative under limited supervision.
• Ability to evaluate issues on-site and make appropriate technical and operational decisions with sound judgment and proper escalation when required.
• Familiarity with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and adherence to regulatory and internal safety standards.
• Commitment to following SOPs, maintenance operating standards (MOS), and company procedures consistently.

The role holder will take ownership to provide engineering support and solution to Plating Production line to ensure smooth operation that meet the Quality, Cost & Delivery (Q,C,D) requirement.

Key Responsibilities

• Determine optimum process condition through comprehensive evaluation & controls to non-conforming products.
• Work directly with Operation and other cross functional team to support, develop and sustain good practices in Plating process including Hazardous Waste Management and Company cost down activities.
• Conduct comprehensive evaluation and qualification for any new product (NPI) or equipment setup according to QMS requirement including technical report writing.
• Analyze & identify key process indicators such as ABL & Yield for continuous improvement activity by product, equipment or process control.
• Conduct investigation & perform related simulation with QCD in any matter of quality related issues/customer claims through FTA, Why-Why Analysis or other relevant tools.
• Manage & perform tracking with equipment/maintenance team to ensure machine stability, safety enhancement is met, project management or related task assigned by superior/HOD.

The AOI (Automated Optical Inspection) Engineer is responsible for optimizing, and maintaining AOI inspection processes in manufacturing environments. This role ensures product quality by improving inspection accuracy, reducing false calls, analyzing defects, and supporting continuous process improvement. The AOI Engineer works closely with Production, Quality, and Process Engineering teams to achieve high yield, reliability, and customer satisfaction

Key Responsibilities

• implement, and optimize manufacturing processes to improve productivity, quality, and efficiency.
• Monitor production performance and analyze process data to identify improvement opportunities.
• Support New Product Introduction (NPI) activities, including process setup, validation, and documentation.
• Work closely with Production, Quality, Maintenance, and Engineering teams to resolve manufacturing issues. failures, and implement corrective actions.
• Execute, and improve Inspection procedures and systems.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

1. Lead the implementation and continuous improvement of Environmental, Health, and Safety (EHS) programs in compliance with Malaysian regulations and corporate standards.
2. Conduct and review HIRARC, risk assessments, and EHS audits to identify hazards, assess risks, and ensure effective control measures across manufacturing operations.
3. Lead or facilitate incident investigations, root cause analysis, and the implementation and tracking of corrective and preventive actions.
4. Plan, coordinate, and deliver EHS training programs, including safety induction, regulatory training, and contractor safety management.
5. Actively support and guide the site Emergency Response Team (ERT), including organizing drills, evaluating emergency preparedness, and ensuring emergency equipment readiness.
6. Analyze EHS performance data, identify trends, and prepare reports for management review and regulatory submission.
7. Partner with Operations, Engineering, Facilities, and Project teams to integrate EHS requirements into manufacturing processes, projects, and management of change (MoC).

This role is part of a Global Endpoint computing team, responsible for development, standardization, and management of the company’s global PC and mobile device infrastructure.

• Manage and maintain a global co-managed Intune and Configuration Manager environment with of over 25,000 endpoints
• Develop and perform software deployments and operating system configuration changes using various software development & automation techniques.
• Provide direct 3rd line end user support for escalated PC and mobile device issues and needs.
• Work with vendors as needed to resolve application or end user issues.
• Identify improvements in existing functionality and recommend enhancements.
• Manage and deliver project activities as part of the overall roadmap.
• Be able to investigate issues under tight time constraints and be able prioritize work accordingly.
• Be able to work with minimal supervision.
• Write and maintain appropriate documentation

Key Performance Measures

• The availability of the Microsoft Endpoint manager services to the business.
• Delivering project goals to the required standard and on time.
• Resolving personally assigned incident tickets promptly to the expected standard.

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for product development and high volume SSD manufacturing is desired.
• Perform manufacturing yield evaluation and data analysis for yield improvement.
• Responsible for prepare, validate and release test package to Agile system.
• Responsible for Failure Analysis of products to meet yield goals and quality targets.
• Interfaces with core team (FW/HW) as well as internal team to solve problems.
• Ability to work with various departments to facilitate the orderly execution of a proposed project plan.
• Participate & contribute in tester/infrastructure and process improvements.
• Ability to read the electrical schematic diagram is an advantage.
• Work closely with departments within the company to ensure product able to meet the delivery timeline.
• Ability to work independently with minimum supervision. 
• Ability to provide guidance to teammate.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

About You

You will own and enhance SEEK’s back-office and identity platforms, with a primary focus on Microsoft 365 and related services, ensuring they are secure, highly available and aligned to our cloud-first strategy.

Based in Kuala Lumpur with 2–3 days a week working from home, you will act as the senior technical escalation point, driving infrastructure projects across data centre, AWS and Azure environments, while mentoring teammates and influencing how we deliver enterprise services at scale.

What You Will Do

• Implement, configure, support and tune high-availability back-office systems in a secure environment.
• Manage and support identity and collaboration platforms including Microsoft 365, Azure AD, Active Directory, Okta and related services.
• Configure and support infrastructure services such as AD, DHCP, DNS and mail systems across multiple regions.
• Drive and deliver key infrastructure projects and technical initiatives across datacentre, AWS and Azure platforms within agreed timeframes.
• Leverage IaaS, SaaS, PaaS and Infrastructure as Code to automate and improve capacity, availability, performance and configuration management.
• Identify risks to service and availability, design mitigations and ensure SLAs are consistently met for IT systems and services.
• Mentor and train team members, provide technical guidance, and act as the go-to escalation point for complex system issues, including occasional on-call support. 

We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that support the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies, making us a leading and trusted partner every step of the way.

We are expanding our Subsea Pipelines capability in Malaysia and are seeking a Project Engineer to support both the delivery of projects and the growth of our regional presence.

This is a hands-on, delivery-focused role with exposure to project execution and client-facing activities, offering the opportunity to develop into a broader, commercially aware position.

Working closely with operations, clients, and regional leadership, you will support the safe and efficient delivery of subsea pipeline and pre-commissioning projects across Malaysia and the wider APAC region.

Key Responsibilities

• Support the execution of subsea pipeline and pre-commissioning projects from planning through to offshore delivery
• Coordinate mobilisation of personnel, equipment, and vessels to ensure efficient project execution
• Deliver and support activities across:
• Subsea pipelines and SURF operations
• Pigging and pipeline cleaning
• Pre-commissioning and commissioning services
• Umbilical and riser testing and flushing
• Nitrogen dewatering and FCGT (Fill, Clean, Gauge & Hydrotest)
• Subsea pumping and testing units
• Assist in pipeline engineering scope including calculations, testing, integrity, and system readiness
• Support tendering activities including technical evaluations, cost inputs, and proposal development
• Interface with clients on technical delivery, with exposure to business development and tender support
• Ensure compliance with HSE, quality, and operational standards at all times
• Support preparation of technical proposals, project documentation, and execution plans

Requirements

• 10+ years’ experience within subsea / pipeline / pre-commissioning environments
• Strong technical understanding with a willingness to be hands-on
• Dewatering with Nitrogen Membrane spread and Coil tubing experience would be ideal.
• Experience in tendering, technical calculations, and project execution
• Good knowledge of the local Malaysian supply chain and vendor landscape
• Project execution experience in Indonesia is an added advantage
• Good communication skills with the ability to engage clients and stakeholders
• Exposure to business development or client interaction is an advantage
• Fluent English (spoken and written)

Profile

• Ideally, a technically strong candidate with an outgoing, client-focused personality, capable of building and maintaining strong customer relationships

Diversity & Inclusion

EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain, improve, and develop QA/QC program as defined in the Company’s Quality Policy standard and control plan.
• Developing and implementing quality control systems, policies, procedures, specifications, forms, checklists, reports, etc., for services, incoming material, and factory assembly, testing and shipping.
• Lead on Quality incident 8D. Investigate quality problems by reviewing quality trends, tracking the root cause(s) of the problem(s), coordinating corrective actions, and implanting appropriate adjustments. Resolve inquires to satisfaction in a professional, timely manner, responding verbally and/or in writing.
• Implement preventive actions to reduce and/or prevent quality problems.
• Performs internal audits of the operation process using inspection results and statistical techniques to provide timely, accurate process and product analysis.
• Analysis audit results and determines proper corrective and preventive action.
• Defines and conducts both systematic/methodical and random/arbitrary tests to ensure proper Quality performance of products.
• Collaborating with operations and engineering team to develop and implement controls and improvements.
• Monitoring and analysing quality performance.
• New product capability, capacity set up, upgrade, troubleshooting and automation.
• Handle virtual factory synchronization standardization, harmonize best practice.
• Work with warehouse personnel to maintain incoming material and finish goods storage according to customer requirements with proper traceability.
• Develops and implements strategies to increase process quality performance through statistical methods and IR 4.0.

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities
• Taking charge of tribology testers maintenance, spare parts inventory management and hardware upgrading activities 

Main Tasks

• Support the Technical Department in managing product certifications and related documentation (e.g. Green Label, SPAN, SIRIM, and third-party laboratory certifications).

• Coordinate with internal stakeholders and external laboratories on product testing, certification submissions, and follow up activities.

• Provide administrative support to the Technical Department, including raising Purchase Requisitions (PR), requesting quotations, preparing SGAN documentation, and maintaining records in SIP.

• Maintain and update technical documents, reports, and records to ensure proper documentation and compliance with company procedures.

• Assist the R&D team with laboratory activities such as product testing, sample preparation, and maintaining laboratory equipment and housekeeping standards.

• Ensure technical documentation and processes comply with relevant company standards and ISO requirements.

Others

• Any other tasks assigned from time to time
• To perform other job functions, deem necessary by immediate Superior / Management.

Security & Security

• Maintain Sika information with appropriate secrecy and adhere to policies regarding confidential information.
• Always maintain confidentiality of formulation.
• Always Ensure compliance with Sika EHS policies and minimum safety requirements.
• Report any hazards, unsafe conditions, or incidents promptly to the immediate superior or EHS personnel.
• Adhere to Sika Life Saving Rules and all applicable safety procedures.
• Participate in required EHS training and support safety initiatives within the workplace.

Funding Societies | Modalku is the largest SME digital finance platform in Southeast Asia. We are licensed and operating  in Singapore, Indonesia, Thailand, Malaysia and Vietnam, and backed by Sequoia India (Peak XV), Softbank Vision Fund, Khazanah and SMBC bank amongst many others. Funding Societies | Modalku provides business financing to small and medium-sized enterprises (SMEs), which is funded by individual and institutional investors, as well as payments solutions to SMEs and consumers.

Here at Funding Societies | Modalku we live by our core values GETFS:

• Grow Relentlessly: Strive to become our best, most authentic selves.
• Enable Teamwork, Disable Politics: Only by forging togetherness, we help each other succeed.
• Test Measure Act: Stay curious and reinvent ourselves, through innovation and experimentation.
• Focus on Impact: Create impact through bias for action and tangible results.
• Serve with Obsession: Build win-win relationships for the long-term by having a customer obsession.

We are looking for a highly motivated individual to join our team as a Recovery & Enforcement Intern. This role is primarily focused on debt recovery operations, with the opportunity to gain hands-on, practical legal exposure in litigation and enforcement processes in Malaysia.

You will gain insight into how recovery strategies are executed—from early-stage collection efforts to legal enforcement and litigation, and have the opportunity to work with external legal counsel and third party recovery agencies.

What will you do:

Recovery & Enforcement Operations Support

• Analyse portfolio performance and recovery trends

• Support the management of delinquent accounts and execution of recovery efforts including tracking, follow-ups, and coordination
• Assist in monitoring repayment progress and implementation of restructuring arrangements and recovery strategies
• Liaise with external legal counsel and other external parties on recovery and litigation matters
• Support preparation, review and summarisation of recovery and litigation-related documents
• Support the filing of all cause papers and monitor compliance with court deadlines
• Support coordination of litigation-based recovery actions, including judgment enforcement
• Maintain and support continuous improvements on records, trackers, and reporting for recovery and enforcement cases, including supporting enhancements and new tracker development
• Undertake any other tasks as may be assigned from time to time within the scope of the role

Hands-on Enforcement & Regulatory Exposure

• Gain practical exposure to litigation-based recovery processes, including supporting the preparation and review of cause papers (e.g. statements of claim, affidavits, enforcement documents), under the guidance of the Legal team
• Develop understanding of enforcement and asset recovery strategies in practice
• Gain practical exposure to the practical steps and processes that facilitate enforcement actions, including:
• Supporting processes involving JPJ (vehicle ownership / enforcement checks)
• Land Office searches and dealings (e.g. title verification, encumbrances)
• Stamp Office processes and documentation requirements

What are we looking for:

• Undergraduate(s) in Law are preferred but this role is open to all backgrounds (Law, Business, Finance, Tech or others) – anyone keen to gain hands-on experience is encouraged to apply
• Strong interest in collections, litigation, recovery, or fintech
• Detail-oriented, organised, and proactive
•  Comfortable working in a fast-paced, execution-focused environment

What's in it for you:

• Exposure in a diverse range of unique peer-to-peer (P2P) financing products
• A comprehensive understanding of the post-delinquency loan lifecycle, from  default management, recovery strategies, and enforcement actions
• Practical understanding of how legal processes are applied in recovery
• Exposure to Malaysia’s court and enforcement ecosystem and processes
•  A unique blend of operational, legal, financial, and tech-driven experience

This internship comes with a monthly allowance of RM1,000.

Sustaining Staff Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA).  

Staff Product Engineers Logistic will be a critical part of our sustaining team, ensures product continuity after mass production.  We are seeking a Product Engineer who has strong back ground in Product Engineering. This role is crucial to ensure execution of sustaining projects and also proactively monitor production supply chain.  The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, and extend product lifecycle.

Key Responsibilities

•  Manage and maintain BOM system.  This will be a crucial on-going task to ensure production system operates flawlessly.  Candidate will be trained to generate and mainitain BOM of all PCP products in new Renesas system.
• Sustain multiple products lifecycles, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Generating and monitor engineering build requests to support qualification/validation builds and customer samples.
• Generate weekly yield/variance monitor report and recommend actions.
• Generate and monitor SBL/SYL updates
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Work with several data base system to generate useful reports to help drive sustaining team productivity.