Total 78 job vacancies by Index Career Consultants Pte. Ltd.

Job Description

• Responsible for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Good testing knowledge on Buck/LDO regulator parameters such as line/load regulation, efficiency, accuracy, RDSON, Load/Line Transient, PSRR, other parametric measurements etc.
• Hands on experience on common bench equipment (Source meter, oscilloscope, spectrum analyzer, logic analyzer, power supplies, Function generator, etc.) for Characterization, Debugs, and circuit deep dives for design debugs.
• Understanding and experience in lab characterization of Mixed Signal or RF IP and Baseband Modem Functional Blocks (ADC, DAC, PLL and etc.)
• Experience in code development for automated measurements using lab equipment is needed.
• Work closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Provide detailed status reports at each phase, test limit (guard band) generation and summary reports.

Job Requirements

• Graduates with Degree in Electronics or Electrical Engineering
• Relevant experience in characterizing mixed signal IP & RF
• Solid understanding of RF & Mixed Signal test concepts and measurements
• Hands on experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Experience in the following areas: Embedded C/C++, LabVIEW, FPGA development.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/python/vba) and automation in reporting is a plus.

• Strong organizational and leadership skills.
• Technical report writing skill must be good includes ability to hand sketch detail on mechanical parts.
• Site supervision and monitoring work progress from commencement to handover of the project.
• Supervise skilled employees and liaise with external contractors to ensure jobs are done satisfactorily.
• Responsible for developing and implement effective maintenance and engineering solutions for equipment problems.
• Compile technical & commercial offers in accordance with customers’ requirements for tender submission in close coordination with the service business unit.
• Submitting all clarifications on site on going project and installantion with pre-order materail negotiation with suppliet & customers.
• Support on calculating total cost of project and establishing a tendering budget cost.
• Coordinate with all client , Supplier and Sub contractor parties involved (internal & external) in the prpearion of quote.
• Monitor all phases of project through various reports and communicate to customers.
• Ensure commitments to customers are met including on-time-delivery performance and all necessary documentation is received from customers.
• To liaise with customers effectively and carry out continual improvement.
• Ability to operate AutoCAD System.
• Advise management on projects progress.

Requirements

• Diploma / Degree in an Engineering discipline, preferably in Mechanical / Electrical / Chemical.
• Fresh graduate are welcome to apply.
• Good leadership.
• Able to liaise with all levels.
• Positive, mature, independent and able to work in fast-paced environment.

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand off, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering, Design Engineering,Quality Engineering, and Foundry Engineering teams.

Job Requirements

• Graduates from Diploma/ Degree in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Test Engineering is preferred
• Hands on experience on Teradyne Ultra Flex or Advantest 93K ATE’s is added advantage.
• Good Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand off, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams.
• 
  

Job Requirements

• Graduates or Diploma/ Degree in Electronics / Electrical or Communication Engineering
• Minimum 3 years of working ATE knowledge on Advantest V93k or Uflex/Iflex Teradyne platform and experience in developing ATE SOC program from NPI stage to volume ramp stage
• Knowledge and hands on experience with statistical analysis software package and techniques, quality and reliability testing.
• Strong software skills (Java, C/C++, Visual Basic, Perl, Python etc.) for programming and debugging test codes
• Good Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Responsibilities

•Assisting engineering teams in setting up the test equipment for engineering and production.

•Manage all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

•Perform Test program correlations and reject verifications.

•Prepare Test hardware for remote testing, ability to load and do sanity check on test program.

•Ability to work in Bench characterization area, which uses Labview and RF equipment like Spectrum analyser, network analyser etc.

•Carry out characterization or sample screening based on internal team request.

Requirements

• Freshers in Diploma in Electronic / Electrical /Mechatronic/IT/Biochemical/Mechanical/computer/Architecture Engineering

Freshers in Higher Nitec/Nitec in Electronics/Electrical Mechatronic/IT/Biochemical/Mechanical/computer/Architecture

•Able to work rotating 12hrs shift

•Ability to use Microsoft Words, Excel and PowerPoint

Job Description :

· Test program Development for Digital, Power Management , RF & Mixed Signal Integrated Circuits (IC’s) using Automated Test Equipment (ATE) for wafer sort and packaged IC’s

· Design Test Hardware Load board and Probe Card

· Work closely with the design engineers on the first silicon debug, device

characterization, test program bring up and production release activities

· Debug of digital test patterns and Device characterization across PVT (Process,Voltage and Temperature)

· Involve on test program hand on, production release, yield improvement and test time reduction

· Operation of Automatic Wafer Prober, Test Handler

· High level of collaboration and interaction with different Hardware, Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams.

Job Requirements:

· Fresh Graduates from reputed Universities with Degree in Electronics / Electrical Engineering , or Candidates with minimum, 2 years of experience

· Good Knowledge of Digital and Analog electronics, able to write scripts using Python is desired.

· Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment .

· Strong verbal and written communication skills and able to work independently

· Result oriented and willingness to learn

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Responsibilities

•Assisting engineering teams in setting up the test equipment for engineering and production.

•Manage all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

•Perform Test program correlations and reject verifications.

•Prepare Test hardware for remote testing, ability to load and do sanity check on test program.

•Ability to work in Bench characterization area, which uses Labview and RF equipment like Spectrum analyser, network analyser etc.

•Carry out characterization or sample screening based on internal team request.

Requirements

• Freshers in Diploma in Electronic / Electrical /Mechatronic/IT/Biochemical/Mechanical/computer/Architecture Engineering

Freshers in Higher Nitec/Nitec in Electronics/Electrical Mechatronic/IT/Biochemical/Mechanical/computer/Architecture

•Able to work rotating 12hrs shift

•Ability to use Microsoft Words, Excel and PowerPoint

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand off, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering, Design Engineering,Quality Engineering, and Foundry Engineering teams.

Job Requirements

• Graduates from Diploma/ Degree in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Test Engineering is preferred
• Hands on experience on Teradyne Ultra Flex or Advantest 93K ATE’s is added advantage.
• Good Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.

Job Description

• Responsible for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Good testing knowledge on Buck/LDO regulator parameters such as line/load regulation, efficiency, accuracy, RDSON, Load/Line Transient, PSRR, other parametric measurements etc.
• Hands on experience on common bench equipment (Source meter, oscilloscope, spectrum analyzer, logic analyzer, power supplies, Function generator, etc.) for Characterization, Debugs, and circuit deep dives for design debugs.
• Understanding and experience in lab characterization of Mixed Signal or RF IP and Baseband Modem Functional Blocks (ADC, DAC, PLL and etc.)
• Experience in code development for automated measurements using lab equipment is needed.
• Work closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Provide detailed status reports at each phase, test limit (guard band) generation and summary reports.

Job Requirements

• Graduates with Degree in Electronics or Electrical Engineering
• Relevant experience in characterizing mixed signal IP & RF
• Solid understanding of RF & Mixed Signal test concepts and measurements
• Hands on experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Experience in the following areas: Embedded C/C++, LabVIEW, FPGA development.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/python/vba) and automation in reporting is a plus.

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand off, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams.
• 
  

Job Requirements

• Graduates or Diploma/ Degree in Electronics / Electrical or Communication Engineering
• Minimum 3 years of working ATE knowledge on Advantest V93k or Uflex/Iflex Teradyne platform and experience in developing ATE SOC program from NPI stage to volume ramp stage
• Knowledge and hands on experience with statistical analysis software package and techniques, quality and reliability testing.
• Strong software skills (Java, C/C++, Visual Basic, Perl, Python etc.) for programming and debugging test codes
• Good Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.

We are looking for Lead/Senior Electrical Engineer for our immediate requirement.

Candidates preferred with:

• Bachelor’s Degree from accredited college / university in Electrical Engineering.
• Possess at least 10 years’ experience in a similar role within FPSO, offshore oil and gas and/or marine or power distribution & transmission sectors.
• Draw on their excellent communication skills, to manage and influence internal and external stakeholders
• Experience in offshore or power transmission& distribution especially on High Voltage AC OR DC Engineering
• Ability to read and write technical specifications.