Total 11 art design entertainment job vacancies in Engineering category in johor bahru johor

Job Description

• We are looking for an innovative Mechanical Design Engineer who is passionate about research, design, prototyping, and project management documentation for advanced automated machines
• As a Mechanical Design Engineer, you will be responsible for researching, designing, and developing vision inspection equipment for various industries, especially for printed circuit board assembly and semiconductors
• You must support hardware-related customer requests, including troubleshooting and customization during benchmarking & site installation
• To achieve the purpose of quality improvement/cost down, you are required to initiate engineering change. Otherwise, you will conduct a feasibility study on equipment, components, and systems performance.

Job Requirements

• A recognized Degree/Master in Mechanical/Mechatronics or equivalent
• Proficient in Solidworks or related CAD software
• Experience in machine design, product development, project management will be an added advantagE
• Knowledge in motion control/electrical & electronics/machine vision will be beneficial
• Innovative and strive for excellence
• Good problem-solving skills
• Fresh graduates are encouraged to apply

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Personal leave
• Open culture

職位描述

• 我們正在尋找一位創新的機械設計工程師，他熱衷於先進自動化機器的研究、設計、原型製作和專案管理文檔
• 作為機械設計工程師，您將負責研究、設計和開發各行業的視覺檢測設備，特別是印刷電路板組裝和半導體
• 您必須支援與硬體相關的客戶請求，包括基準測試和現場安裝期間的故障排除和定制
• 為了達到提高品質/降低成本的目的，您需要啟動工程變更。否則，您將對設備、組件和系統性能進行可行性研究。

工作要求

• 機械/機電一體化領域認可的學位/碩士學位或同等學歷
• 精通Solidworks或相關CAD軟體
• 具備機器設計、產品開發、專案管理經驗將是額外優勢
• 運動控制/電氣電子/機器視覺方面的知識將是有益的
• 勇於創新、追求卓越
• 良好的解決問題的能力
• 鼓勵應屆畢業生申請

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 事假
• 開放文化

Responsibilities :

• Working with Senior Engineer on Electrical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress payment evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements :

• Recognised Diploma or Degree in Electrical Engineering or Building Services from reputable Polytechnic or University with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements is compulsory.
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Responsibilities :

• Working with Senior Engineer on Mechanical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress payment evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements :

• Recognised Diploma or Degree in Mechanical Engineering or Building Services from reputable Polytechnic or University with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements is compulsory.
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Responsibilities :

• Working with Senior Engineer on Mechanical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress payment evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements :

• Recognised Diploma or Degree in Mechanical Engineering or Building Services from reputable Polytechnic or University with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements is compulsory.
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Responsibilities :

• Working with Senior Engineer on Electrical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress payment evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements :

• Recognised Diploma or Degree in Electrical Engineering or Building Services from reputable Polytechnic or University with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements is compulsory.
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Responsibilities :

• Working with Senior Engineer on Electrical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress payment evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements :

• Recognised Diploma or Degree in Electrical Engineering or Building Services from reputable Polytechnic or University with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements is compulsory.
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Responsibilities :

• Working with Senior Engineer on Electrical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress payment evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements :

• Recognised Diploma in Electrical Engineering or Building Services from reputable Polytechnic with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements is compulsory.
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Responsibilities :

• Working with Senior Engineer on Mechanical engineering services design and project administration for building projects in Singapore & Overseas.
• Commissioning of design with close collaboration with other building service discipline design team within office, project Owners and other Consultants.
• Preparation of tender enquiry documents & specification drawings.
• Assisting Owner to call tender, conduct site show around, arranging and conducting of tender interviews, carry out tender evaluation & reports and recommendation of contract award.
• Full project administration including project control, planning, project progress monitoring, costing, attending Owner/Consultant and site meetings (local and overseas), reviewing and approval of shop drawings and materials, progress claims evaluation, attending T&C, etc till full project completion.
• Liaising with authorities for compliances, plan submissions and approval.
• Arranging and attending site inspections by independent inspectors and authorities for clearances.

Requirements:

• Recognised Diploma in Mechanical Engineering or Building Services from reputable Polytechnic with relevant experience in the building industry.
• Fresh graduate/s are welcome to apply. On the job training will be provided.
• Conversant with Singapore building services Codes, Regulations and requirements
• Conversant with international codes would be an advantage.
• Conversant with Microsoft Office Suite and Autocad softwares.
• Conversant with Revit software would be an advantage.
• Able to travel.

Job responsibilities :

• Join the R&D team to create and design the ‘world’s first’ Optical and Vision IOT Devices for acquisition of gemstone appearance and optical properties for AI-driven computer vision applications.
• Produce engineering deliverables including drawings, BOM, parts cost, components data-sheets, technical specification, 3D models, assembly instructions, testing standards/procedures, design compliance codes, jig/tools/fixture/mould design etc; from Concept to DFMA-design, for manufacturing of prototypes to final commercial products and its iterations
• Create preliminary artistic drawings in the form of illustrations and storyboards of product concepts, present them to stakeholders and creatively use the feedback to refine product design
• Oversee new products testing in compliance to design specifications and analyse its results
• Define UI/UX on products and remote controllers/control panel and ideate CMF solutions that convey a brand identity and produce compellingly desirable products
• Set-up and maintain an internal PDM system to manage the entire product design lifecycle and ensuring that product data is accurate, up-to-date, and accessible to all stakeholders, including designers, engineers, manufacturers and vendors
• Conduct research and product development projects using internal gatekeeping process, prepare project and user requirements specifications, execute experiments and investigations, document and report findings, communicate to key stakeholders, and handover to downstream teams
• Work collaboratively with an entrepreneurial team of product engineers, software/AI-engineers, manufacturing engineers and vendors to successfully deliver cutting edge products within tight deadlines
• Act as the subject matter expert for design and engineering of IOT Devices, supporting various technical challenges across all BPH 200 product categories

Required qualifications and profile :

• Diploma or Bachelor degree in mechatronics, mechanical, industrial engineering or related field
• Minimum 3-5 years of relevant work experience in industrial product design, preferably in semiconductor or consumer product manufacturing environment
• Proven skills in usage of CAD Solidworks, 2D/3D CAD and PDM-systems
• Knowledge in applying GD&T principles and drafting standards
• Experience in CMF finishing applications for consumer electronics
• Possess mechatronics experience in development of complete systems that consisted of controllers, servo, step motors, sensors, vision and optical systems
• Experience in product regulatory testing, CE and safety certification etc.
• Have a good understanding of product realization process from development to production
• Demonstrate excellent teamwork, project management and vendor leadership skills

If you have aspirations to be part of a dynamic team to pioneer game-changing AI solutions for the Gemstone industry, please send in your resume.

Job Description

• Design civil & structural systems for industrial, commercial & residential projects
• Prepare structural design calculations, simulations, and models to ensure the safety and efficiency of designs
• Collaborate with project managers to ensure the successful execution of projects from conception to completion
• Ensure that all designs adhere to relevant codes, standards, and regulatory requirements
• Perform visual inspection works

Requirements

• Degree in Civil / Structural Engineering
• Min. 3 years of experience in design of buildings & infrastructure works
• Proficient in AutoCAD
• Able to work independently
• Good communication & interpersonal skills