Total 185 Others/Any job vacancies

Responsibilities:

• Perform highly diversified duties to install and maintain production machines.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance technician.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance

Perks & Benefits

• Open culture
• Personal development opportunities

Duties & Responsibilities

• Responsible to preform Preventive Maintenance works as per schedule for Production machines and Equipment.
• Carry out Maintenance activity for supporting facilities as per planning (weekly, monthly, quarterly, etc).
• Record and document of all related maintenance activities reports such as SOP, PM, Calibration report and etc.
• Assist Production Department in machine operation setting where applicable.
• Carry out routine monitoring, inspection, maintenance and repair works as assigned by superior.
• Attend and initiate troubleshooting and repair of any machinery breakdown, report immediately to the superior if face any difficulties in completing jobs.
• To carry out installation of new machine equipment.
• Monitor and supervise all work performed by outside contractors is done properly and high standard.
• Ensure the stock for spare part is sufficient.
• Carry out maintenance task as assigned by the superior and management from time to time.

Requirements

• Candidate must possess at least Certificate / Diploma in mechanical or any relevant field.
• Minimum 1 years working experience preferably in machine maintenance and facilities or equivalent.
• with more than 1 vancancy

Perks & Benefits

• Casual dress code
• Medical insurance

主要職責和責任

成功應徵者將負責：

1. 確保機器和/或設備的現場設置、安裝、測試任務、維護、製造、修理和保養按計劃或根據需要進行。
2. 監控、控制和調整機器設備，以提高品質、生產效率和生產線效率。
3. 維護、保養、修理工廠內的設施和設備。
4. 保持機器、設備和車間區域的清潔。
5. 確保所有維護和保養流程均依照 ISO 9001、HACCP/GMP、ISO 22000 和 FSSC 22000 的要求執行。
6. 遇到任何問題，均需向主管及/或部門主管報告。
7. 公司和/或部門上級指派的其他職責。

所需資格和技能

理想的候選人應具備：

1. 至少擁有電氣/機械/機電工程文憑或鍋爐工證書或同等資格。
2. 具備良好的機械或電氣知識，並在製造業環境中擁有相關工作經驗者優先考慮。
3. 歡迎應屆畢業生申請。
4. 學習熱情高，工作態度積極。
5. 可靠，能夠獨立工作，只需極少監督。
6. 能夠有效執行指令並排除故障。
7. 注重細節，能夠保持高度謹慎。
8. 良好的分析和故障排除能力。
9. 具備良好的人際溝通能力，能夠有效地與上司、同事及其他各級人員溝通。
10. 具備電腦操作能力，熟練使用微軟辦公室軟體及其他相關軟體和應用程式。
11. 願意輪班工作。
12. 總部設在馬六甲亞羅牙也。
13. 擁有自己的交通工具。
14. 現有全職職缺。

福利待遇

• 津貼（旅費、交通費等）
• 休閒著裝要求
• 個人休假
• 開放文化
• 個人發展機會
• 有薪培訓和發展

Job Description

• Develop, maintain and generate smart scope programs for use in inspection, verification of production materials for incoming, outgoing, FAI and in-process parts.
• Work closely with the QA team to measure, examine and test molded part to identify defects and non-conformance to specification.
• Manage and maintain all measurement machine to ensure functionality and meeting production needs.
• Prepare and submit required report(s) or documentation ensure clear identification of product inspection status

Qualification :

• SPM / Diploma in any related field
• Able to read 2D or 3D drawings
• Good knowledge of measurement equipment such as smart scope, caliper, height gauge etc. is an advantage
• Good communication skill and able to communicate effectively with other function teams
• Able to work in a team and individually
• Able to work under the environment with fast tempo
• Good attendance and punctuality to work

Perks & Benefits

• Open culture
• Personal development opportunities

Job Descriptions:

• Provide on field technical assistance and service all small items, massage chairs, fitness products and other health related products.
• Make appointment with customers and arrange doorstep technical / customer service
• Respond promptly and address all customers’ cases within stipulated working days upon receiving the service request
• Conduct QC test on products and trouble shooting

Job Requirements:

• Possess at least a Diploma in Mechanical, Electrical or Electronic Engineering, preferable with a valid A0 Chargeman certificate.
• Candidates with at least two (2) years of working experience relating to outdoor servicing or Quality Control are encouraged to apply.
• Possess a valid license and willing to travel. Those with GDL license would be advantages.
• Mature, well organized with excellent customer service skills.
• Good command of both oral and written English and Bahasa Malaysia.
• Fresh graduates are encouraged to apply.
• Able to start work in short notice

Perks & Benefits

• Commission and bonus
• Medical insurance
• Personal leave
• Medical & Dental Benefit
• Birthday Leave

職位描述：

• 提供現場技術援助和服務，包括所有小型物品、按摩椅、健身產品和其他健康相關產品。
• 與客戶預約並安排上門技術/客戶服務
• 收到服務請求後，應在規定的工作日內及時回覆並處理所有客戶提出的問題。
• 對產品進行品質控制測試和故障排除

職位要求：

• 至少擁有機械、電氣或電子工程專業的文憑，最好持有有效的A0級主管證明。
• 歡迎至少兩 (2) 年戶外服務或品質控制相關工作經驗的候選人申請。
• 持有有效駕照並願意出差。持有GDL駕照者優先考慮。
• 成熟穩重，做事井井有條，具備優秀的客戶服務技能。
• 英語和馬來語口語和書面表達能力良好。
• 歡迎應屆畢業生申請。
• 能夠立即開始工作

福利待遇

• 佣金和獎金
• 醫療保險
• 個人休假
• 醫療和牙科福利
• 生日假

Major Duties and Responsibilities

The successful candidate will be responsible for:

1. Ensuring on-site set up, installation, test task, maintenance, fabrication, repairing and servicing of machines and or equipment are done according to schedule or when needed.
2. Monitoring, controlling and adjusting the machines and equipment for better quality, productivity and production line effectiveness.
3. Maintaining, up-keeping, repairing the amenities and facilities in the factories.
4. Maintaining the cleanliness of the machines, equipment and workshop area.
5. Ensuring all the maintenance and servicing process are carried out according to ISO 9001, HACCP/GMP, ISO 22000 and FSSC 22000 requirements.
6. Reporting to the supervisor and/or HOD for any problems encountered.
7. Other responsibilities as assigned by Company and/or departmental superior.

Qualifications and Skills Required

The ideal candidate will have:

1. Possess at least a Diploma in Electrical/Mechanical/ Mechatronic Engineering or Boilerman certification or equivalent.
2. Possess good mechanical or electrical knowledge and relevant working experience in the manufacturing environment will be an added advantage.
3. Fresh graduates are encouraged to apply.
4. Keen to learn and positive working attitude.
5. Reliable and able to work independently with minimal supervision.
6. Able to execute instructions effectively and do trouble-shooting.
7. Detail oriented, able to practice high level of caution.
8. Good analytical and trouble-shooting skills.
9. Good interpersonal skill, able to communicate effectively to the superior, peers and all other levels.
10. Computer-literate, proficient with Microsoft Office, other relevant software and application.
11. Willing to work on shift and rotation.
12. To be based in Alor Gajah, Melaka.
13. To possess own transport.
14. Full-time positions are available.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Personal leave
• Open culture
• Personal development opportunities
• Paid training and development

We are expanding and looking for a responsible and hands-on Technician to join our operations team.

• Only for Malaysian and Preferably for Sabahan and Sarawakian
• Company will provide hostel for successful outstation candidates

Key Responsibilities:

• Perform servicing, troubleshooting and repair of aerial lift machines and related equipment.
• Conduct preventive maintenance according to schedule.
• Provide onsite support for customers, including breakdown response.
• Prepare service reports, checklists, and relevant documentation.
• Ensure tools, spare parts, and equipment are well maintained.
• Follow company SOP, safety procedures, and document management processes.

Requirements:

• SPM / Certificate in Mechanical, Electrical, Mechatronics or related field.
• Experience in heavy machinery, MEWP, or mechanical repair is an added advantage.
• Able to work independently, responsible, and willing to learn.
• Possess valid driving licence.
• Good attitude, punctual, and able to follow work instructions.

Benefits:

• Training provided (including MEWP training if required)
• Competitive salary
• Annual leave
• Bonus
• Medical coverage
• Daily Allowances
• Overtime
• Career development opportunities
• Friendly working environment

Requirements :

• Diploma in Electrical, Mechanical, Automation Engineering or equivalent. Loyalty. Willing to learn new things and improve skills level.
• Able to repair in Hydraulic and Pneumatic Excellent communication skills in Bahasa Malaysia and English.
• Have good equipment troubleshooting skills. Able to write reports and procedures.
• Able to carry out service, overhaul and repair of air compressor.
• Willing to work on OT and stand by.
• Able to work with minimum supervision Base in Ipoh.

Brief of job descriptions :

• Day to day maintenance activities.
• To perform all scheduled Preventive maintenance for all tools diligently. To resolve all equipment interruptions.
• To troubleshoot and repair all tools issue on time.
• To ensure maximum machine availability and minimal downtime.
• To assist engineers in implementation of upgrades, alterations or retrofits to the machines.
• To organize all spare parts, ware par, supplies and tools. Assist engineeris in planning and controlling of costs and spare parts consumption.
• Equipment – to assist in new tools installation and start-up.
• Service experience in air compressor, hydraulic & pneumatic will be priority admission.

COMPANY

• Repair and installation of machinery and equipment, Retail trade, except of motor vehicles and motorcycles, Wholesale trade, except of motor vehicles and motorcycles
• 10-20 employees.

Auto-Mech Industries Resources Sdn. Bhd. was established in Malaysia since 1998. We are providing our customer compressed air product, pneumatic system & parts and hydraulic system & parts to all types of manufacturer from small workshops to large Industrial Corporation.

We also got do the below service for our customer :

• Sales, services, overhaul & rental air compressor
• Sales & services pneumatic & hydraulic parts Design, fabricate, and install pneumatic & hydraulic automation & control system
• Design & install of compressed air piping system Design & provide solution for compressed air system problem
• Provide professional recommendation and solution for customer regarding JKKP Perak

Perks & Benefits

• Employee equity
• Personal leave
• Personal development opportunities

Perks & Benefits

• Employee equity
• Personal leave
• Personal development opportunities

Senior Accounts Executive

We are seeking a capable and detail-oriented Senior Accounts Executive to support the full spectrum of accounting functions. The successful candidate will play a key role in financial reporting and compliance matters.

Candidates with prior experience in a manufacturing environment will be given preference.

Key Responsibilities

• Handle full set of accounts, including General Ledger, Accounts Payable, Accounts Receivable, and Fixed Assets.
• Prepare timely monthly management accounts and financial reports.
• Perform month-end closing activities, journal entries, and account reconciliations.
• Monitor and analyse manufacturing costs, including material, labour, and overhead.
• Conduct variance analysis and inventory reconciliation.
• Ensure proper inventory valuation and cost control procedures.
• Manage and ensure compliance with LHDN e-Invoicing requirements, including invoice validation, submission, and monitoring of rejections.
• Ensure proper documentation, record-keeping, and audit trail for e-Invoices.
• Liaise with auditors, tax agents, and regulatory authorities.
• Assist in budgeting, forecasting, and financial analysis.
• Ensure compliance with SST, corporate tax, and other statutory requirements.

Requirements

• Degree in Accounting, Finance, or equivalent.
• Minimum 3 years of relevant working experience, preferably in a manufacturing environment.
• Strong knowledge of cost accounting and inventory management.
• Experience in ERP/accounting systems.
• Proficient in Microsoft Excel.
• Strong analytical skills with attention to detail.
• Able to work independently and meet deadlines.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Medical insurance
• Personal leave
• Personal development opportunities

• To support production on rotating shift and performing preventive maintenance, repairs, troubleshooting on equipment & machinery and do method solving & problem on machines at production lines.
• Conduct basic Repair / troubleshoot machines problem at production line with assist from Technicians 2, 3 or 4.
• Assists in the installation of new equipment and machines.
• To create, execute & update Preventive Maintenance, Autonomous Maintenance for line equipment, machines, and jig/fixtures according to Master Schedule List per Standard defined.
• To liaise with Maintenance Section or Engineer for maintenance plan and spare parts Availability/replacement/controlling.
• Work with Technicians 1, 2, 3 & 4, Engineer / Supervisor in the day-to-day operation.
• Performs routine maintenance tasks, such as cleaning, lubricating, and replacing parts.
• Documents work performed and preventive maintenance records.
• Carry out any other duties assigned by technicians 3 or 4 and direct superior from time to time.
• To provide verbal & written communication on equipment downtime, improvement, and document it for future reference.
• To ensure the design and the utilization of the machines & equipment are made according with all the Safety features / regulation.
• To ensure 5s is being carried out at workplace and follow Safety Rules & Regulation during work being carried out.
• Spare parts arrangement.
• To support Ad Hoc tasks assigned by direct superior from time to time.

Responsible for timely machine installation and ensuring optimal production operations by maintaining equipment and enhancing yield, utilization, and product quality.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform machine installation as per schedule.
• Maintaining the smooth operation of production and optimizing yield, utilization, and product quality through machine sustaining and maintenance.
• Diagnose and troubleshoot equipment malfunctions, identifying root causes and implementing effective solutions.
• Monitor equipment performance indicators and implement corrective actions to address deviations from performance targets.
• Adhere to all safety regulations and protocols while performing maintenance and repair tasks, ensuring a safe working environment for all team members.
• Update machine status from outgoing shift to incoming shift.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ensure production machine performance is well maintain.
• Assist process/equipment engineers to carry out or setup new device evaluation / engineering run when needed.
• Practice 6’s every time after maintenance/repairing /conversion
• Ensure all activities perform to the environment procedures.
• Ensure that all waste/ chemical are properly store/label and scrap.   
• Maintain and perform troubleshooting   on assigned operation.
• Highlight to superior any activities in the company that may be contrary to the environment policy.
• Hand shake Passover/communication book and daily machine status report.
• Follow all environmental procedures in carrying out daily activities
• Highlight to supervisor of any activities in the company that may be contrary to environment policy.
• Other duties and responsibilities which may be assigned by the Company from time to time.
• This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule.

Sebagai sebuah syarikat elektronik yang berkembang pesat, kami sedang mencari calon yang boleh menunjukkan kepakaran mereka dalam membentuk asas kukuh untuk pasukan perkhidmatan kami, terutamanya dalam bidang pemasangan dan perkhidmatan penghawa dingin (Air Con). Juga berperanan sebagai menjadi sumber teknikal utama untuk pasukan perkhidmatan pelanggan kami, membantu mereka bagi memastikan penyelesaian yang lancar dan cepat.

Tanggungjawab Juruteknik Penghawa Dingin termasuk tetapi tidak terhad kepada

• Memasang, memeriksa, menyelenggara, dan membaiki pelbagai jenis dan jenama penghawa dingin komersial dan kediaman.
• Melaksanakan penyelenggaraan preventif berkala dan kerja-kerja pembetulan pada sistem penghawa dingin.
• Mencari punca masalah elektrik dan mekanikal jika ada kerosakan.
• Melaksanakan kerja-kerja membaiki seperti penggantian kompresor penghawa dingin, motor, kipas, dan lain-lain.
• Mengesyorkan kerja-kerja membaiki yang sesuai dan penambahbaikan kepada pelanggan.
• Melaksanakan servis penghawa dingin di kediaman dan premis komersial pelanggan yang termasuk pencucian kimia, pemeriksaan gas, dan perkhidmatan penyelenggaraan umum.
• Memastikan semua kerja-kerja mematuhi standard alat dan Akta Kesihatan dan Keselamatan.
• Melaporkan harian dan mingguan kepada pengurus terus.
• Sebarang tugas lain yang diperlukan oleh penyelia segera.

• Pengalaman praktikal dalam pemasangan, penyelenggaraan (termasuk mencuci kimia), mengesan masalah, dan membaiki penghawa dingin.
• Mampu melakukan kerja fizikal.
• Penguasaan asas bertutur dan menulis dalam Bahasa Melayu dan Bahasa Inggeris
• Lesen memandu GDL.
• Pengalaman minimum 1 tahun diperlukan.
• Selesa bekerja 5.5 hari (Isnin hingga Jumaat 9 pagi hingga 6:00 petang / Sabtu 9 pagi hingga 1 petang).
• Diutamakan dengan sijil Lesen BCA (Lesen Penghawa Dingin) - Pemasangan Sokongan Struktur Untuk Unit Penghawa Dingin atau yang setaraf / Sijil Kebolehan Khas Malaysia (Diutamakan).

• Attend to and troubleshoot test equipment issues during equipment downtime and low-yield situations.
• Set up and configure test equipment for production runs, including handler conversions and load board changes.
• Perform PCB board debugging and repair when test hardware fails during testing.
• Maintain good housekeeping practices and comply with all company and departmental safety rules, regulations, and disciplinary standards.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Role Description:  

• Responsible for providing professional maintenance, inspection, troubleshooting, and repair services 
for industrial cranes and hoists. This role plays a critical part in ensuring customer equipment operates 
safely, reliably, and efficiently, while representing the Konecranes brand with strong technical expertise 
and customer service. Perform preventive maintenance not requiring compliance inspections, 
corrective maintenance, retrofits, crane installation or commissioning. Technicians can be further 
classified into "Maintenance Technician" or "Inspector" (i.e. those predominantly performing preventive 
maintenance) and "Service Technicians" (i.e. those predominantly performing maintenance and 
retrofits).  

Key Tasks :  
 
• Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, 
   and related lifting equipment at customer sites. 
• Diagnose mechanical, electrical, and control system faults and implement corrective actions. 
• Carry out load testing, adjustments, calibrations, and commissioning of crane systems as per company 
   standards and safety requirements. 
• Complete service reports, job documentation, and recommendations for customers accurately and on 
   time. 
• Provide technical support and professional advice to customers regarding equipment condition, safety 
   risks, and service solutions. 
• Ensure all work complies with Konecranes safety policies, ISO standards, and statutory regulations. 
• Support emergency call-outs and breakdown service as required. 
• Collaborate with the Service team to improve service delivery, technical skills, and customer 
   satisfaction. 
• Maintain company tools, service vehicle, and equipment in safe and proper working order.

Awareness of ISO 14001 and 45001 standards

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Good discipline and behavior, willing to learn and grow.
• Shift technician support production to achieve KPI goals on Molding machine down time; utilization & to improve machine MTBA & OEE.
• Ability to perform machine preventive maintenance job and to improve equipment capability thru continuous improvement activities.
• Ability to perform assembly equipment conversion and major troubleshooting to ensure smoothed production line.
• This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Good discipline and behavior, willing to learn and grow.
• Shift technician support production to achieve KPI goals on wire bond machine down time; utilization & to improve machine MTBA & OEE.
• Ability to perform machine preventive maintenance job and to improve equipment capability through continuous improvement activities.
• Ability to perform assembly equipment conversion and major troubleshooting to ensure smoothed production line.
• This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead daily sustaining activities for Sputter equipment to ensure high equipment uptime and optimal performance.
• Support Engineers to monitor and drive continuous improvement on key KPIs such as OEE, MTBF, MTTR, Unscheduled downtime and PM effectiveness.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.
• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Lead problem-solving sessions and provide technical guidance to junior technicians.
• Participate in spare parts review, critical spare strategy, and cost optimization initiatives.
• Ensure safety protocols and cleanroom discipline are strictly followed during maintenance activities.

Responsible for timely machine installation and ensuring optimal production operations by maintaining equipment and enhancing yield, utilization, and product quality.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform machine installation as per schedule.
• Maintaining the smooth operation of production and optimizing yield, utilization, and product quality through machine sustaining and maintenance.
• Diagnose and troubleshoot equipment malfunctions, identifying root causes and implementing effective solutions.
• Monitor equipment performance indicators and implement corrective actions to address deviations from performance targets.
• Adhere to all safety regulations and protocols while performing maintenance and repair tasks, ensuring a safe working environment for all team members.
• Update machine status from outgoing shift to incoming shift.

About the company:

At BID Operations, we are passionate about supporting our clients in their journey towards success. Our mission is to empower you to thrive by handling the essential yet time-consuming aspects of your business operations, allowing you to concentrate on strategic growth and innovation.

Key Responsibilities:

Administer and configure Microsoft 365 services, including user accounts, security groups, SharePoint, Teams, Exchange, and OneDrive. Microsoft Intune device policy and Autopilot, Conditional Access, audit-log review, and license assignment.

Configure and manage Jira workflows, permissions, and user roles to ensure optimal usage across teams. Integrate Jira with other tools as needed. Includes Jira Assets administration.

Manage and optimize Jira Service Management for IT service requests, incident management, and change requests to ensure smooth internal processes. Includes request type, queue, SLA, and automation-rule design across ITIL-aligned practices (incident, request fulfillment, change, problem, knowledge, and service-level management).

Implement and manage access permissions for internal systems, ensuring users have the appropriate level of access based on their roles and responsibilities.

Set up and maintain SSO solutions across systems, including Microsoft Azure AD, ensuring smooth authentication processes for users. Covers SAML and SCIM integrations with a broad SaaS estate

Design and enforce security policies, including password policies, multi-factor authentication (MFA), and encryption standards, in accordance with best practices and regulatory requirements.

Ensure efficient and secure processes for onboarding and offboarding employees, including creating user accounts, assigning roles, and revoking access when necessary.

Set up and manage internal systems to meet business needs, ensure secure integration with existing platforms, and maintain alignment with IT security and compliance standards.

Deploy and manage mobile and endpoint devices using Microsoft Intune (for Windows and Android) and Jamf (for Apple devices). Enforce security policies, ensure compliance, and provide remote support capabilities across all managed devices.

Monitor system logs and perform regular audits to ensure compliance with security policies. Respond to and mitigate security incidents.

Automate repetitive tasks related to user management, access control, and system configurations using PowerShell, Bash, or other scripting languages. Includes Jira/JSM automation rules

Ensure that systems meet compliance standards such as GDPR, HIPAA, or other relevant regulations, and participate in internal and external audits.

Operate within ITIL-aligned service management practices — incident, request fulfilment, change, problem, knowledge, service-level, and vendor management — using JSM as the system of record. Maintain queue hygiene, SLA compliance, and accurate ticket categorization.

Author and maintain Runbooks, Standard Operating Procedures, and Knowledge Base articles in Confluence to enable consistent service delivery.

Liaise with SaaS vendors (e.g., Atlassian, Microsoft) and internal Compliance and Finance teams to coordinate license renewals, seat planning, tier upgrades, and order-form approvals.

Plan, document, and execute IT changes (e.g., permission scheme updates, SaaS integrations, group rollouts) under appropriate peer or stakeholder review, with rollback procedures and clear customer communication.

• Bachelor’s degree in Information Technology, Computer Science, or a related field.
• 3+ years of experience in system administration or IT systems configuration.
• Expertise in Microsoft 365 administration including Exchange Online, Teams, SharePoint, and OneDrive.
• Experience in Jira administration (user roles, permissions, and workflow configurations).
• Experience in Jira Service Management for handling IT service requests and change management.
• Strong knowledge of SSO technologies, particularly Microsoft Azure AD and other identity management platforms.
• Familiarity with access control policies and user lifecycle management (provisioning, de-provisioning).
• Hands-on experience with cybersecurity best practices, including MFA, encryption, and vulnerability management.
• Strong proficiency in scripting languages such as PowerShell and Bash for automating tasks.
• Experience with cloud platforms (Azure, AWS) is a plus.
• Awareness of and exposure to ITIL 4 service-management practices (incident, request fulfilment, change, problem, knowledge, service-level, vendor management).
• Experience with SaaS platform administration.
• Strong written communication and documentation skills — able to author runbooks and Knowledge Base articles, and comfortable using dashboards and metrics.
• Exposure to enterprise AI tooling is a plus.

Ramp Up measurements including ELFR Measurements and qualification measurements

• Driving the measurements in full self-responsibility
• Booking tester capacity, align with line control
• Preparation of measurements
  • Initiate the preparation of tester cell (changing contact unit and/or part tweaking)
  • Load and start test program in GUI
  • Run test program with first part and check contact
  • Prepare parts in handler
  • Prepare and handle trays failure trays
  • Ensure proper contact
  • Feedback any issues to the corresponding support function and ensure timely support

• Observe yield of running measurement and initiate measures in case of drop down right in time, involve other support functions

Interface Role:

• Serve as the critical link between all involved parties Quality, Test Development, Test Engineering, Equipment Engineering, etc.

Test Cell Troubleshooting:

• Act as the first level support for instabilities and issues with first series, non/pre -series processes during ramp up and qualification measurements on Advantest V93k testers and Cohu Delta Matrix handlers

Proactive Problem Solving:

• Identify, apply, and document solutions and workarounds for recurring issues to ensure high data quality and efficiency.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support IQA and QC equipment operation to ensure smooth daily production and inspection activities.
• Perform basic troubleshooting and 1st-level recovery for IQA/QC equipment and testers.
• Support setup, installation, buyoff, and verification activities for new IQA and QC equipment.
• Able to operate and support inspection and quality control equipment.
• Maintain equipment log sheets, calibration records, preventive maintenance schedules, and documentation.
• Coordinate with Engineering, Quality, Production, and Operations teams to support inspection and quality activities.
• Monitor equipment condition and escalate abnormal issues for timely corrective actions.
• Ensure compliance with 6S practices, ESD requirements, safety procedures, and lab/shopfloor housekeeping standards.
• Support equipment uptime improvement and minimize downtime through proper maintenance coordination.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible to audit line per IPQC Checklist and Work Instruction, compile & analyze IPQC audit results weekly and drive for compliances.
• Responsible to conduct buy off during conversion for items like component traceability, feeder, profile etc.
• Responsible in monitoring the process control in place for critical process.
• To participate in and monitor NPI activities (including tape board buy off).
• Monitor QA Line Stop activity daily and follow up and verify on effectiveness of corrective Action/closure.
• Responsible to perform testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Managing Ongoing Reliability Test (ORT) and Outgoing Quality Assurance (OQA) inventory.
• Raise quality alert for line awareness when comes to line excursion or customer feedback.
• Other task assigned by superior.